Quick review summary
The Luxfighter P36-H11 LEDr is an H11-format replacement with a documented model reference, H11 connector and photographed rear assembly. This review covers its physical record, package evidence, beam images, nine-point illuminance table, emitter-area temperature and close-range noise.
In the recorded setup, Luxfighter reached 1,523 lux at EMAX and 35.5 lux at B50L. Its measured chip/emitter thickness was 2.468 mm, emitter-area temperature was 110 °C after 20 minutes, and operating noise was 51.3 dBA at 3.5 cm. The product reference available for this page is P36-H11.
The white-wall image, rainbow map and E-Mark composite are different evidence types. The first shows the visible beam, the second shows relative hotspot distribution, and the third records lux at named points. Their combined record is useful for comparison, but it is not an official approval test or a vehicle-specific fitment decision.
Product identity and approval evidence
Product: Luxfighter P36-H11 LEDr
Model reference: P36-H11
Bulb format: H11
Review scope: construction, packaging evidence, optical evidence, temperature and operating noise.
An approval document is on file for the identified Luxfighter product. The exact approval number and holder are not reproduced because those fields are not part of the customer-facing record here. The document and the measurements below are separate evidence. This bench evaluation is not an official ECE R37 type-approval test.
For the regulatory distinction, see the ECE R37 explanation linked in the related articles below.
Luxfighter P36-H11 LEDr fitment and product construction
The photographs document the H11 mounting interface, front emitter area, rear cooling structure and connected lead. They give physical reference points for installation planning. They do not confirm clearance, dust-cap closure, rotation or wiring space inside a particular headlamp.
Packaging and included parts
The package images show the reviewed presentation, included contents and package measurements. They describe the documented configuration and do not establish that every retail configuration is identical.
Product views, connector and lamp-body thickness
Emitter close-up and measured chip/emitter thickness
The emitter close-up and adjacent measurement show the front light-source geometry in the source images. The measured chip/emitter thickness is 2.468 mm. It is a physical measurement with the stated datum, not an R37 regulatory dimension, and it cannot independently predict beam shape or fitment.
Test method and evidence boundary
Illuminance was recorded in lux at 3.5 m in a 26 °C room after 30 minutes of operation. Temperature was recorded at the photographed emitter-area point after 20 minutes. Operating noise was recorded at 3.5 cm in dBA.
- Same-setup comparison: the white-wall image, rainbow map, E-Mark panel and thermal and noise readings are records from this setup.
- R37-defined requirement: the approval and optical terminology is explained only where the available record supports it.
- Not tested under the official approval procedure: this page does not establish luminous flux, Tcap, 60 °C retention, box-system behaviour, failure-state performance or complete vehicle approval.
White-wall beam evidence
The white-wall photograph shows the visible low-beam spread, transition and brighter areas in the recorded setup. Aim, camera exposure, reflector geometry and headlamp design affect the image. Read it as visual evidence for this test, not as a complete road-performance conclusion.
Rainbow map and hotspot evidence
The rainbow map adds spatial context to the white-wall photograph by showing the relative colour distribution and hotspot position captured for Luxfighter. Its colour scale is not a lux value and does not independently establish glare control or approval.
E-Mark panel results and complete nine-point table
The E-Mark composite records nine illuminance values in lux. 75R, 50R and 25R are right-side points, 25L and 50L are left-side points, and 25V and 50V are centre points.
| Point | Measured illuminance | Evidence role |
|---|---|---|
| 25L | 352.2 lux | Left-side point |
| 50L | 459 lux | Left-side point |
| B50L | 35.5 lux | Glare-control-related point |
| 50V | 1,090 lux | Centre point |
| 25V | 1,052 lux | Centre point |
| 75R | 962.3 lux | Right-side point |
| 50R | 1,390 lux | Right-side point |
| 25R | 383.5 lux | Right-side point |
| EMAX | 1,523 lux | Peak reference |
The centre readings were 1,090 lux at 50V and 1,052 lux at 25V. The strongest named right-side point was 50R at 1,390 lux. B50L measured 35.5 lux and is explained separately because it is glare-control-related. EMAX measured 1,523 lux and is a peak reference, not a substitute for the complete table or optical images.
Temperature and operating noise
After 20 minutes, the photographed emitter-area point reached 110 °C. This is a setup-specific point temperature, not Tcap, ambient temperature, driver-box temperature or a service-life prediction.
Operating noise measured 51.3 dBA at 3.5 cm. The short microphone distance makes cooling-system sound easier to capture than it would be from a vehicle cabin. Enclosure, installation position and surrounding noise can change what is heard in use.
Where this review is useful and where it stops
This page gives a documented Luxfighter P36-H11 construction record, package record, measured chip/emitter thickness, three optical evidence types, a complete nine-point table, temperature and noise values. Use those records to compare the product with the physical space and approval documents for the intended lamp.
The evidence does not become a complete road test, official type-approval result, lifetime forecast or vehicle-specific fitment decision. The approval document on file identifies the reviewed product, but its exact reference, marking and applicable lamp conditions still need to be checked separately.
Installation and approval checks
Confirm an H11 interface, compare the photographed base and rear assembly with the available lamp depth, and check connector seating, rotation, dust-cap closure and harness routing in the actual headlamp. Product photographs are physical references, not proof of compatibility.
After installation, check aim and the cutoff on a suitable wall. For approval decisions, verify the exact product document, marking, applicable lamp and vehicle conditions and local requirements. The approval record and this same-setup measurement record answer different questions.
Final assessment
The Luxfighter P36-H11 record is specific: 2.468 mm measured chip/emitter thickness, 1,523 lux EMAX, 35.5 lux B50L, 110 °C at the recorded emitter-area point after 20 minutes and 51.3 dBA at 3.5 cm. Read the white-wall, rainbow and E-Mark evidence together, then check physical clearance, beam aim and the current approval documentation in the intended installation.
Luxfighter P36-H11 LEDr review FAQ
What product is covered?
This review covers the mapped Luxfighter P36-H11 LEDr product and its recorded test evidence.
Does the approval document prove compatibility with every vehicle?
No. The document is separate from physical fitment. Check the actual H11 socket, lamp housing, dust cap, wiring path and applicable lamp conditions.
What do B50L and EMAX mean?
B50L measured 35.5 lux and is glare-control-related. EMAX measured 1,523 lux and is a peak reference. Neither replaces the full table or optical images.
How were temperature and noise recorded?
Temperature was recorded at the photographed emitter-area point after 20 minutes. Noise was recorded at 3.5 cm and measured 51.3 dBA.